10 (11)
Folding rotating handle with threaded pin D-20mm H-50mm M6 x 12mm5,53 €
Kliknij i zobacz ten produkt oraz inne rozmiary
Rotating handle with screw and nut H-50mm M6 x 13mm3,20 €
Kliknij i zobacz ten produkt oraz inne rozmiary
Tel+48 34 353 00 03E-mailbiuro@backer.pl
Currency:€Language:enDelivery country:Poland
-
Control elements
- Adjustable, fixed, and clamping levers
- Handwheels and crank handles
- Star knobs
- Star knobs with threaded pin - 38.0051
- Star knobs with a threaded stainless steel shaft - 38.0051.INOX
- Star knobs with blind threaded bush - 38.0048
- Star knobs with blind threaded bush - 6.0048
- Star knobs with embedded nut, through-hole - 7.0027
- Flat star knob made of duroplast, with a square socket - 38.4000
- Flat star knob made of duroplast, with threaded, through bushing - 38.4001
- Flat star knob with through threaded bushing - 6.0149
- Flat star knob with through threaded bushing - 6.0150
- Flat star knob with a threaded through bushing - 36.0150
- Star knob with an embedded nut in plastic - 7.0038
- Star knob with nut embedded in plastic - 7.0026
- Star knob with nut embedded in plastic, heavy-duty version - 7.0037
- Star knob with a blind threaded bushing - 38.0109
- Star knob with through threaded bushing - 38.0110
- Star knob with threaded pin - 36.0011
- Star knob with stainless steel threaded spindle - 36.0011.INOX
- Star knob with threaded pin - 38.0013
- Star knob with threaded stem - 38.0055
- Star knob with threaded spindle - 6.0051
- Star knob with threaded spindle - 6.0055
- Star knob with threaded stud - 6.0057
- Star knob with threaded spindle made of galvanized steel - 38.0111
- Star knob with smooth bushing - 6.0050
- Star knob with threaded bushing - 36.0010
- Star knob with threaded bushing - 38.0012
- Star knob with threaded bushing - 38.0014
- Star knob with threaded bushing - 38.0052
- Star knob with threaded bushing - 6.0052
- Star knob with threaded bushing - 6.0056
- Star knob with through-threaded bushing - 38.0049
- Star knob with through-threaded bushing - 38.0053
- Star knob with through threaded bushing - 6.0049
- Star knob with through-threaded bushing - 6.0053
- Star knob with through threaded bushing - 36.0022
- Star knob with threaded through bushing and long offset - 38.0056
- Star knob with built-in nut - 8.0001
- Star knob with built-in nut - 8.0002
- Star knob with built-in screw - 8.0003
- Star knob with built-in screw - 8.0004
- Star knob with lock and through threaded bushing - 7.0029
- Stainless steel star knob with a blind threaded bushing - 38.0059.INOX
- Stainless steel star knob with through threaded bushing - 38.0054.INOX
- Stainless steel star knob with through threaded bushing - 38.0058.INOX
- Star knob with an embedded screw - 7.0028
- Quick-clamping knob according to DIN 6336 with metal hub - 36.0009
- Knob with threaded spindle and steel shoulder - 36.0013
- Knob with threaded bushing and steel collar - 36.0012
- Knob with an embedded screw in plastic, featuring a lock and a short offset - 7.0030
- Star knob with threaded bushing - 6.0341
- Star knob with threaded pin - 6.0051.INOX
- Star knob with threaded spindle - 6.0059
- Star knob with threaded bushing - 6.0058
- Star knob with smooth bushing - 6.0054
- Star knob with threaded bushing - 6.0048.INOX
- Star knob with threaded stem, ending with a plastic pad - 36.0020
- Star knob secure - 38.0064
- Star knob with lock and blind threaded bushing - 7.0229
- Safe star knob with threaded spindle - 38.0065
- Star knob according to DIN 6336, with a blind threaded bushing, coated with soft elastomer - 36.0018
- Star knob according to DIN 6336, with threaded pin, covered with soft elastomer - 36.0016
- Massive star knob made of polished stainless steel, with a blind threaded bushing - 38.0240.INOX
- Massive star knob, made of polished stainless steel, with threaded spindle - 38.0241.INOX
- Star knob made of duroplast, according to DIN 6336, with threaded bushing - 37.0004
- Star knob made of duroplast, according to DIN 6336, with threaded pin - 37.0005
- Star knob with through-threaded bushing INOX - 6.0049.INOX
- Cross handles
- Aluminum cross knob, according to DIN 6335, with blind smooth bushing - 38.0234
- Cross knob made of aluminum, according to DIN 6335, with a blind threaded bushing - 38.0235
- Cross knob made of aluminum, according to DIN 6335, with through threaded bushing - 38.0236
- Cross knob made of duroplast with threaded stud - 36.1047
- Cross knob made of duroplast with threaded bushing - 36.1044
- Cross knob with threaded stem - 38.0047
- Cross knob with threaded spindle - 6.0047
- Cross knob with threaded bushing - 38.0044
- Cross knob with threaded bushing - 6.0044
- Cross knob with through threaded bushing - 38.0045
- Cross knob with through-threaded bushing - 6.0045
- Cross handle with built-in nut - 8.0016
- Cross knob with built-in nut - 8.0017
- Cross knob with built-in screw - 8.0018
- Cross knob with smooth bushing - 6.0046
- Cross knob with threaded stem - 07G
- Cross knob with threaded stem - 6.0047.INOX
- Cross knob with built-in nut - 8.0100
- Cross knob with built-in screw - 8.0101
- Cross knob according to DIN 6335, with a blind threaded bushing - 36.0014
- Cross knob according to DIN 6335, with threaded pin - 36.0015
- Cross knob made of duroplastic, according to DIN 6335, with threaded bushing - 37.0006
- Cross knob made of duroplast, according to DIN 6335, with threaded stud - 37.0008
- Cross knob with blind threaded bushing INOX - 6.0044.INOX
- Cross knob with through threaded bushing INOX - 6.0045.INOX
- Butterfly knobs
- Stainless steel wing knob with threaded hole - 38.0015
- Butterfly knob with nut embedded in plastic - 7.0015
- Butterfly knob with threaded spindle - 38.0004
- Butterfly knob with threaded spindle - 38.0011
- Butterfly knob with threaded stem - 38.0602
- Butterfly knob with threaded stem - 7.0010
- Butterfly knob with threaded spindle - 7.0012
- Butterfly knob with threaded stem and cap - 8.0020
- Butterfly knob with threaded bushing - 38.0005
- Butterfly knob with threaded bushing - 38.0010
- Butterfly knob with threaded bushing - 38.0601
- Butterfly knob with threaded bushing - 7.0009
- Butterfly knob with through-threaded bushing - 38.0006
- Butterfly knob with built-in nut - 8.0010
- Butterfly knob with built-in nut - 8.0008
- Butterfly knob with built-in nut - 8.0011
- Butterfly knob with built-in nut - 8.0021
- Butterfly knob with an embedded screw in plastic - 7.0016
- Butterfly knob with built-in screw - 8.0012
- Zinc alloy adjustable butterfly knob with threaded bushing - 38.0036
- Zinc alloy wing knob with threaded spindle, adjustable - 38.0037
- Butterfly knob with threaded stem - 6.0116
- Through butterfly knob with built-in nut - 8.0008.INOX
- Butterfly knob with through-threaded bushing - 6.0115
- Butterfly knob with threaded spindle - 6.0110
- Butterfly knob with blind threaded bushing - 6.0109
- Butterfly knob with threaded stem - 6.0113
- Wing screw
- Butterfly knob with threaded stem - 6.0110.INOX
- Butterfly knob made of polished stainless steel, with a threaded hole - 38.0016.INOX
- Butterfly knob with threaded bushing and cap - 38.0312
- Butterfly knob with through threaded bushing - 38.0311
- Butterfly knob with threaded stem - 38.0313
- Butterfly knob with a blind threaded bushing made of stainless steel - 6.0109.INOX
- Knurled knobs
- Knurled knob - 7.0042
- Knurled knob with a screwdriver slot and threaded pin - 7.0004
- Knurled knob with threaded spindle - 38.0078
- Knurled knob with threaded spindle - 6.0082
- Knurled knob with threaded pin - 6.0083
- Knurled knob with threaded pin - 6.0086
- Knurled knob with threaded pin - 7.0006
- Knurled knob with threaded pin - 7.0041
- Knurled knob with threaded spindle, without shoulder - 19.0100
- Knurled knob with threaded bushing - 38.0076
- Knurled knob with threaded bushing - 6.0081
- Knurled knob with a blind threaded bushing - 6.0084
- Knurled knob with threaded bushing - 6.0163
- Knurled knob with threaded bushing - 7.0005
- Knurled knob with through-threaded bushing - 38.0077
- Knurled knob with through threaded bushing - 6.0085
- Knurled knob with embedded nut - 7.0007
- Knurled steel knob with threaded through hole - 6.0206
- Knurled steel knob with threaded stud - 6.0205
- Knurled knob with through threaded bushing - 6.0077.INOX
- Knurled knob with threaded spindle - 7.0002
- Knurled knob with through threaded bushing - 6.0077
- Knurled knob with threaded bushing - 7.0003
- Knurled knob with threaded spindle - 6.0078
- Knurled knob with threaded spindle - 6.0080
- Knurled flat knob with through-threaded bushing - 6.0343
- Knurled flat knob with threaded through hole - 6.0148
- Knurled knob with threaded bushing - 6.0162
- Knurled flat knob with threaded through hole - 6.0147
- Knurled knob with a blind threaded bushing - 6.0076
- Knurled knob with smooth bushing - 6.0164
- Knurled knob with a slot for a flathead screwdriver, partial thread - 16.0205
- Knurled knob with stainless steel threaded stem - 38.0078.INOX
- Knurled knob with threaded, blind bore bushing - 38.0314
- Knurled knob with threaded bushing, through-hole - 38.0315
- Knurled knob with threaded pin - 38.0316
- Knurled knob made of stainless steel with offset, with threaded spindle, according to DIN 464 - 38.0260.INOX
- Knurled knob made of stainless steel without shoulder, with threaded pin, according to DIN 653 - 38.0261.INOX
- Knurled stainless steel knob with a threaded through hole - 38.0262.INOX
- Knurled knob made of stainless steel with a threaded through hole - 38.0263.INOX
- Knurled knob with threaded pin INOX - 6.0078.INOX
- Knurled knob with a screwdriver slot and threaded pin - 6.0088
- Knurled steel knob with threaded through hole - 6.0207
- Wheels and wheelsets
- Swivel caster set with brake, mounting plate, plain bearing - 80.2000
- Swivel caster set with brake, mounting hole, plain bearing - 80.2100
- Swivel wheel assembly, mounting hole, plain bearing - 80.1100
- Swivel caster set, mounting plate, plain bearing - 80.1000
- Wheel set, fixed, mounting plate, plain bearing - 80.0000
- Fixed caster set, mounting hole, plain bearing - 80.0100
- Swivel caster set, mounting plate, roller bearing, rubber wheel - 80.1001
- Swivel caster set with brake, mounting plate, roller bearing, rubber wheel - 80.2001
- Fixed caster set, mounting plate, roller bearing, rubber wheel - 80.0001
- Fixed caster set, mounting plate, plain bearing, PA wheel - 80.0005
- Swivel caster set, mounting plate, plain bearing, PA wheel - 80.1005
- Swivel caster set with brake, mounting plate, plain bearing, PA wheel - 80.2005
- Fixed caster set, mounting plate, plain bearing, PP wheel - 80.0006
- Swivel wheel set, mounting plate, plain bearing, PP wheel - 80.1006
- Swivel caster set with brake, mounting plate, plain bearing, PP wheel - 80.2006
- Control knobs
- Knob with threaded stem - 6.0064
- Knob with special bushing - 6.0063
- Dial with scale for knurled knob 6.0309 and 6.0310 - 6.0311
- Knob with threaded bushing - 6.0131
- Knob with threaded bushing - 6.0067
- Cylindrical knob with threaded bushing - 6.0060
- Cylindrical knob with smooth bushing - 6.0061
- Knob with threaded bushing - 6.0065
- Knurled knob with threaded bushing - 6.0309
- Knurled knob with smooth bushing - 6.0310
- Three-arm knobs
- Three-arm knob with threaded pin - 38.0074
- Three-arm knob with threaded spindle - 6.0074
- Three-arm knob with threaded bushing - 38.0069
- Three-arm knob with threaded bushing - 6.0069
- Three-arm knob with through-threaded bushing - 38.0071
- Three-arm knob with through threaded bushing - 6.0071
- Three-arm knob with built-in nut - 8.0013
- Three-arm knob with built-in nut - 8.0014
- Three-arm knob with built-in screw - 8.0015
- Three-arm knob with threaded spindle - 6.0075
- Three-arm knob with smooth bushing - 6.0073
- Three-spoke knob with threaded bushing - 6.0192
- Three-arm knob with embedded nut - 7.0019
- Leveling feet
- Adjustable Swivel Foot - 19.0001
- Fixed adjustable foot with a slot for a Phillips screwdriver in the base, with a stainless steel shaft - 19.0108.INOX
- Rotating adjustable foot - 19.0004
- Adjustable fixed foot - 19.0002
- Movable footer - 19.0008
- Movable foot - 38.1200
- Sliding foot - 6.0141
- Movable footer - 6.0142
- Sliding foot - 6.0144
- Movable footer - 6.0320
- Non-slip adjustable foot - 38.1202
- Non-slip movable foot - 6.0143
- Adjustable foot with mounting holes - 38.1201
- Adjustable foot with mounting holes - 6.0145
- Adjustable foot with mounting holes - 6.0327
- Adjustable foot with mounting holes - 6.0330
- Adjustable foot with mounting holes, anti-slip - 38.1203
- Stała stopka - 19.0009
- Stała stopka - 19.0014
- Rubber fixed foot - 19.0106
- Rubber fixed foot with stainless steel pin - 19.0106.INOX
- Fixed metal foot - 19.0003
- Knurled fixed foot - 19.0010
- Stała stopka - 19.0070
- Adjustable foot with mounting holes - 6.0328
- Adjustable foot with mounting holes - 6.0328 (kopia)
- Adjustable stainless steel foot, anti-slip - 38.1305.INOX
- Flat fixed foot - 19.0012
- Flat stationary foot with metal cap - 19.0013
- Knurled fixed foot - 6.0314
- Adjustable fixed foot with built-in screw - 19.0202
- Fixed adjustable foot with built-in stainless steel screw - 19.0202.INOX
- Adjustable steel foot, non-slip, with a one-sided mounting bracket - 38.1301
- Adjustable steel anti-slip foot - 38.1300
- Adjustable stainless steel foot, anti-slip, with single-sided mounting bracket - 38.1306.INOX
- Adjustable stainless steel foot, non-slip, with double-sided mounting bracket - 38.1307.INOX
- Swivel steel anti-slip foot - 38.1321
- Here is the translation of the text: "Foot with retractable wheel and threaded stem - 16.1280"
- Adjustable stainless steel foot, hygienic, non-slip, with a single-sided mounting bracket - 38.1311.INOX
- Retractable wheel foot with mounting plate - 16.1281
- Adjustable foot for self-assembly - 38.1200.ESR
- Swivel foot with mounting holes, for self-assembly - 38.1201.ESR
- Non-slip adjustable foot, self-assembly - 38.1202.ESR
- Swivel foot with mounting holes, non-slip, self-assembly - 38.1203.ESR
- Swivel foot with internal thread, for self-assembly - 38.1204.ESR
- Swivel foot with internal thread, non-slip, self-assembly - 38.1205.ESR
- Adjustable stainless steel foot, hygienic, anti-slip - 38.1310.INOX
- Adjustable steel foot - 38.1320
- Fixed footer - 6.0315
- Adjustable foot with swivel stem - 6.0316
- Adjustable foot with swivel stem - 6.0317
- Swivel foot with keyway - 6.0318
- Anti-slip adjustable foot with key slot - 6.0319
- Swivel foot with a keyway cutter in the shank, R12.5 - 6.0321
- Swivel foot with a keyway cutter on the shaft, R15 - 6.0322
- Non-slip swivel foot, R15 - 6.0323
- Non-slip swivel foot with a key slot, R12.5 - 6.0324
- Non-slip swivel foot with a key slot, R15 - 6.0325
- Swivel foot with mounting holes, R12.5 - 6.0326
- Swivel foot with mounting holes and key slot, R24 - 6.0329
- Swivel foot with mounting holes, key slot, and anti-slip pad, R12.5 - 6.0331
- Swivel foot with mounting holes, wrench flat, and anti-slip pad, R15 - 6.0332
- Swivel foot with mounting holes, wrench flat, and anti-slip pad, R24 - 6.0333
- Stopka wahliwa z otworami montażowymi - 38.2201
- Hexagonal Knobs, Bolts, and Nuts
- Locating pins
- Lock nut for pins and setting knobs - 29.0022.INOX, made of stainless steel.
- Locknut for studs and positioning knobs - 29.0021
- Self-locking mounting pin with ball latch and button - 50.0001
- Locating pin without lock, made of stainless steel - 29.0002.INOX
- Locating pin without lock, made of stainless steel - 29.0033.INOX
- Locating pin with lock, stainless steel - 29.0035.INOX
- Locating pin without lock, made of stainless steel, with short thread - 29.0037.INOX
- Locating pin with lock, made of stainless steel, with short thread - 29.0038.INOX
- Locating pin without lock, made of stainless steel - 36.0029.INOX
- Locating pin without lock, black oxidized - 29.0001
- Locating pin without lock, made of galvanized steel - 29.0032
- Locating pin without lock, made of oxidized steel, with short thread - 29.0037
- Locating pin without lock, made of galvanized steel - 36.0033
- Locating pin without lock, with fine thread, made of stainless steel - 29.0042.INOX
- Locating pin without lock, T-handle, made of oxidized steel - 29.0039
- Locating pin without lock, with T-handle, fine thread, made of stainless steel - 29.0040.INOX
- Locating pin without lock, with fine thread, made of galvanized steel - 29.0043
- Locating pin without lock, made of galvanized steel - 36.0028
- Locating pin without lock, with fine thread, made of oxidized steel - 29.0041
- MINI positioning pin without lock - 29.0027
- MINI locating pin with lock - 29.0028
- Locating pin with retaining ring - 38.0029
- Locating pin with lock, fine-threaded, made of nickel-plated steel - 29.0003
- Locating pin with lock, with fine thread, made of stainless steel - 29.0004.INOX
- Locating pin with lock, made of galvanized steel - 29.0034
- Locating pin with lock, made of oxidized steel, with short thread - 29.0038
- Locking pin with lock, made of galvanized steel - 36.0032
- Locking pin with lock, made of stainless steel - 36.0031.INOX
- Locking pin with fine thread, made of galvanized steel - 29.0044
- Locking pin with lock, made of galvanized steel - 36.0030
- Locating pin with lever - 38.0027
- Locating pin with lever, made of stainless steel - 38.0028.INOX
- Locking pin with mounting plate and lock - 38.0033
- Locating pin with mounting plate, without lock - 38.0032
- Locating pin with star grip - 36.0017
- Locating pin - 6.0235
- Locating pin made of oxidized steel with locknut - 6.0232
- Locating pin with oval tension ring - 38.0189 (formerly 38.0029-1)
- MINI locating pin without lock - 38.0038
- MINI locating pin with lock - 38.0039
- Locking pin without a lock, with fine thread, made of stainless steel - 29.0050.INOX
- Locating pin with lock, fine thread, stainless steel - 29.0051.INOX
- Self-locking mounting pin with ball catch, with button - 50.0005
- Locating pin made of stainless steel, with pull ring - 38.0029.INOX
- Locating pin without pull knob, made of oxidized steel - 6.0231
- Cylindrical Handles and Grips
- Rotary handle EUROMODEL with threaded pin - 6.0306
- Rotary Handle EUROMODEL with Threaded Hole - 6.0306
- Folding revolving handle with threaded spindle - 6.0128
- Rotating steel handle, chrome-plated - 39.0003
- Rotating handle with threaded pin - 38.0126
- Rotary handle with threaded spindle - 6.0126
- Rotary handle with threaded pin and hex socket - 38.0127
- Rotary handle with threaded pin and internal hexagon - 38.0018
- Rotary handle made of chrome-plated steel - 39.0005
- Rotating handle made of chrome-plated steel - 39.0009.INOX
- Rotating handle made of sandblasted steel - 39.0008
- Rotary handle with screw and nut - 6.0125
- Rotating handle, foldable, made of duroplast, with threaded pin - 39.0007
- Rotating handle, foldable made of duroplast, with threaded bushing - 39.0006
- Handle with a smooth hole - 38.0138
- Handle with smooth bore - 6.0138
- Handle with a smooth through hole - 6.0122
- Handle with a smooth through hole - 6.0123
- Handle with threaded hole - 38.0121
- Handle with threaded hole - 6.0121
- Handle with self-aligning hole - 6.0137
- Self-aligning handle with hole - 6.0140
- Handle with a smooth shank ending in a thread - 38.0134
- Handle with threaded pin - 6.0124
- Cylindrical handle with long threaded shaft - 38.0135
- Cylindrical handle with threaded hole - 38.0096
- Cylindrical handle with mounting hole - 38.0097
- Cylindrical handle with threaded pin - 38.0098
- Cylindrical handle with threaded stud - 38.0124
- Cylindrical handle with threaded bushing - 38.0095
- Cylindrical handle with threaded bushing - 6.0095
- Cylindrical handle with threaded bushing - 6.0095.INOX
- Rotary handle EUROMODEL with threaded pin - 6.0203
- Rectangular knurled handle - 6.0305
- Handle with a smooth shank ending in a thread - 6.0134
- Cylindrical handle with threaded hole - 6.0096
- Handle with smooth hole - 6.0139
- Rotary handle with threaded pin and internal hexagon - 6.0127
- Handle with a smooth shank ending in a thread - 6.0135
- Cylindrical handle with threaded pin - 6.0098
- Folding rotating handle with threaded pin - 6.0128.INOX
- Cylindrical handle made of duroplast, with threaded hole - 38.0317
- Rotating handle with stainless steel screw and nut - 6.0125.INOX
- Rotating handle, bearing-mounted, with threaded pin and hex socket - 38.0129
- Polished cylindrical handle with threaded hole - 38.0099
- Cylindrical handle made of duroplast with threaded pin - 38.0323
- Rotating handle made of duroplast with threaded spindle - 38.0190
- Rotary handle with threaded pin and hex socket - 38.0191
- Folding swivel handle - 38.0321
- Rotating handle made of duroplast, foldable - 38.0319
- Cylindrical handle with mounting hole - 6.0097
- Cylindrical handle with mounting hole - 6.0136
- Mushroom handles, T-type handles
- Mushroom-shaped handle with threaded hole - 38.0104
- Mushroom knob with threaded spindle - 38.0105
- Mushroom knob with threaded bushing - 38.0103
- T-handle with threaded hole - 6.0118
- T-handle with threaded pin - 38.0120
- T-handle with threaded bushing - 38.0117
- T-handle with threaded bushing - 6.0117
- T-handle with stainless steel threaded bushing - 6.0117.INOX
- Mushroom-shaped knob with threaded bushing - 6.0103
- T-handle with threaded pin - 6.0120
- Mushroom-shaped handle with threaded hole - 6.0104
- Clamp nut with fixed pin, according to DIN 6305 - 38.6305
- Mushroom-shaped handle with threaded sleeve INOX - 6.0103.INOX
- Spherical handles
- Spherical handle made of duroplast with threaded hole - 37.0001
- Spherical handle made of duroplast with a metal threaded insert - 37.0002
- Spherical handle made of duroplast with a mounting hole - 37.0003
- Spherical handle with threaded hole - 6.0092
- Spherical handle with mounting hole - 6.0093
- Spherical handle with metal threaded sleeve - 6.0094
- Spherical knob with threaded hole - 38.0092
- Spherical handle with threaded bushing - 38.0094
- Spherical handle made of polyamide with a mounting hole, self-locking - 38.0093
- Spherical handle made of duroplast with a mounting hole according to DIN 319, form L - 37.0011
- Bail and tubular handles
- Caps for tubular handles with a diameter of 20 mm or 30 mm - 6.0023, 6.0027
- End caps for tube holders with a diameter of 20 mm or 30 mm - 11.0010
- Aluminum bow handle with threaded bushings - 38.0020
- Aluminum loop handle with through holes - 38.0019
- Full handle with threaded bushings - 38.0024
- Bow handle with through holes and caps - 38.0021
- Bow handle with through holes - 38.0023
- Handle with through holes - 38.0118
- Handle with through holes - 38.2400
- Handle bracket with through holes - 6.0018
- Handle with through holes and concealing caps - 11.0003
- Bow handle with through holes and masking caps - 38.0081
- Bracket handle with threaded bushings and end caps - 38.0022
- Bail handle with threaded bushings - 38.0119
- Bow handle with threaded bushings - 6.0019
- Handle with threaded bushings and cover caps - 38.0080
- Bail handle with built-in nuts - 6.0017
- Bracket handle, tubular with a diameter of 20 mm - 11.0007
- Handle with a diameter of 20 mm - 6.0022
- Loop handle, tubular with a diameter of 30 mm - 11.0008
- Loop handle, tubular with a diameter of 30 mm - 6.0025
- Full bow handle with threaded bushings - 6.0021
- Full bow handle with threaded bushings made of stainless steel - 6.0021.INOX
- Bridge handle with through holes - 6.0260
- Bail handle with angled feet - 6.0020
- Pipe handle - 38.0700
- Pipe handle with adjustable bracket spacing - 38.0701
- Bail handle - 38.0702
- Drawer and equipment handle - 38.0703
- Drawer and equipment handle - 38.0704
- Drawer and equipment handle - 38.0705
- Aluminum bow handle with threaded bushings - 38.0706
- Aluminum handle with through holes - 38.0707
- Heavy-duty bracket handle, made of aluminum, with threaded bushings - 38.0708
- Heavy-duty hoop handle, made of aluminum, with through holes - 38.0709
- Tubular bracket handle with threaded bushings - 38.0712
- INOX bow handle with threaded bushings - 38.0713.INOX
- Massive bow handle, made of stainless steel - 38.0714.INOX
- Massive loop handle - 38.0715.INOX
- Heavy bracket handle with through holes - 38.0716
- Angled handle, secure with threaded bushings - 38.0720
- Duroplast bow handle with threaded bushings - 6.6219
- Bail handle with through holes for DIN 912 cylinder screws - 38.0082
- Bridge handle with through holes for hexagon screws DIN 933 / DIN 931 - 38.0084
- Bail handle with brass threaded bushings - 38.0085
- Oblique bow handle - 6.0258
- Angled tubular handle with threaded bushings - 38.0719
- Aluminum handle with threaded bushings - 38.0710
- Aluminum handle with through holes - 38.0711
- Latches and screws
- Smooth ball catch made of stainless steel - 40.0013.INOX
- Threaded ball plunger with slot and high spring force - 40.0002
- Threaded ball plunger with slot and low spring force - 38.0030
- Threaded ball plunger with hexagon socket - 38.0307
- Threaded ball plunger with flange, made of steel, with a screwdriver slot - 40.0012
- Threaded plunger with ball and high spring force - 40.0002.INOX
- Threaded ball plunger with high spring force and hex socket - 40.0004
- Threaded ball plunger with stainless steel ball and hex socket - 38.0308.INOX
- Threaded ball plunger, made of stainless steel, with hex socket, with reinforced spring force - 40.0004.INOX
- Threaded ball plunger, made of stainless steel, with a screwdriver slot - 38.0031.INOX
- Threaded latch with a cylindrical head and screwdriver slot - 40.0012.INOX
- Threaded latch with pin and hex socket - 40.0007
- Threaded latch with pin and hexagonal socket with high clamping force - 40.0008
- Threaded latch with pin and screwdriver slot - 40.0005
- Threaded latch with a pin and screwdriver slot with high clamping force - 40.0006
- Threaded catch with pin and internal hexagon - 40.0009
- Threaded latch with pin and internal hexagon, high clamping force - 40.0010
- Threaded pin latch made of stainless steel, with a hex socket, reinforced clamping force - 40.0008.INOX
- Threaded latch with plastic pin and internal hex - 40.0011
- Threaded catch with plastic pin and internal hexagon - 40.0011.INOX
- Threaded pin latch, stainless steel, with screwdriver slot and hex socket, with reinforced clamping force - 40.0010.INOX
- Threaded pin latch made of stainless steel, with a hex socket - 40.0007.INOX
- Threaded pin latch, made of stainless steel, with screwdriver slot - 40.0005.INOX
- Threaded pin latch made of stainless steel, with a screwdriver slot and hex socket - 40.0009.INOX
- Threaded pin latch made of stainless steel, with a screwdriver slot, featuring reinforced clamping force - 40.0006.INOX
- Ball plunger screw - 6.0849
- Ball plunger screw made of stainless steel - 6.0849.INOX
- Threaded ball plunger - 6.0238
- Threaded plunger with ball and hex socket - 6.0247.INOX
- Threaded plunger with ball and hexagonal socket, with reinforced clamping force - 6.0248.INOX
- Threaded ball catch - 40.0001.INOX
- Threaded ball plunger with hexagon socket - 40.0003.INOX
- Hinges
- Flat metal hinge - 6.0347
- Chrome-plated flat metal hinge - 6.0348
- Flat metal hinge made of stainless steel - 6.0349.INOX
- Hinge with through holes - 6.0151
- Hinge with through holes - 6.0313.INOX
- Hinge with through holes, non-detachable - 38.0502
- Hinge with through holes, detachable, left opening - 38.0500
- Hinge with through holes, detachable, right opening - 38.0501
- Hinge with threaded pins - 38.0505
- Hinge with threaded pins - 6.0153
- Hinge with threaded pins - 6.0159
- Hinge with threaded pins - 6.0160
- Hinge with threaded pins - 38.0506
- Hinge with threaded bushings - 38.0507
- Hinge with threaded bushings - 6.0152
- Hinge with threaded bushings - 6.0157
- Hinge with threaded bushings - 6.0158
- Hinge with threaded bushings and through holes - 6.0161
- Hinge with threaded bushings - 38.0504
- Hinge with bushings and threaded pins - 6.0154
- Hinge with through holes - 38.0151
- Hinge with longitudinal through holes - 38.0154
- Hinge with opening force adjustment - 6.0460
- Hinge with position lock and screw caps - 6.0470
- Lowered pin hinge - 6.0402
- Flat plastic hinge - 38.0512
- Galvanized metal hinge - 6.0350
- Hinge with through holes, non-removable - 34.0015
- Hinge with through holes, non-removable - 34.0029
- Vibration isolators
- Vibration isolator with threaded studs, 60 Shore A, type A - 45.0001
- Vibration isolator with stud and threaded hole, 60 Shore A, type B - 45.0004
- Vibration isolator with threaded stud, 60 Shore A, type D - 45.0006
- Threaded hole vibration isolator, 60 Shore A, type C - 45.0009
- Tapered vibration isolator with threaded studs, 60 Shore A - 45.0011
- Vibration isolator with threaded hole, 60 Shore A, type E - 45.0010
- Parabolic Vibration Isolator (Buffer), 60 Shore A - 45.0012
- Vibration isolator with threaded studs, 45 Shore A, type A - 45.0002
- Vibration isolator with threaded stainless steel studs, 60 Shore A, type A - 45.0003.INOX
- Vibration isolator with stud and threaded hole, 45 Shore A, type B - 45.0005
- Threaded stud vibration isolator, 45 Shore A, type D - 45.0007
- Vibration isolator with threaded stainless steel stud, 60 Shore A, type D - 45.0008.INOX
- Quick-release clamps
- Universal wood pusher - 6.0344
- Horizontal clamp with horizontal flange, adjustable - 70.1100
- Horizontal clamp with vertical flange, adjustable - 70.1200
- Safe horizontal clamp with horizontal flange, adjustable - 70.1101
- Horizontal clamp with horizontal flange, adjustable - 70.1102
- Horizontal clamp with vertical flange, adjustable - 70.1201
- Sliding tensioner with horizontal flange, push-pull - 70.3100
- Vertical clamp with horizontal flange, adjustable - 70.2102
- Vertical hold-down clamp with adjustable vertical flange - 70.2201
- Horizontal clamp with horizontal flange, adjustable - 70.1103
- Horizontal clamp with vertical flange, adjustable - 70.1202
- Vertical clamp with horizontal flange, adjustable - 70.2100
- Vertical clamp with vertical flange, adjustable - 70.2200
- Vertical clamp with horizontal flange, massive - 70.2101
- Sliding tensioner with horizontal flange, pull-push - 70.3101
- Sliding tensioner with horizontal flange, push-pull - 70.3102
- Sliding tensioner without a flange, pull-push - 70.3400
- Quick-release fastener with loop and latch - 70.4100
- Quick-release fastener with loop and hook, heavy-duty - 70.4101
- Indicators
- 5-digit position indicator, 20mm bushing - 6.0620
- Reducing sleeve for position indicator - 6.0605
- 4-digit position indicator, 14mm bushing - 6.0610
- 3-digit position indicator, 10mm sleeve - 6.0600
- 5-digit position indicator, 30mm sleeve - 6.0630
- Intermediate plate for position indicator - 6.0606
- Mounting plate for position indicator - 6.0590
-
Latching systems
- Fastenings
- Snap lock (side lock) - 15.5080
- Adjustable tension latch - 15.5081
- Hook closure - 15.5082
- Adjustable tension latch - 15.5083
- Hook clasp - 15.5084
- Adjustable stainless steel toggle latch - 15.5080.INOX
- Adjustable stainless steel toggle latch - 15.5081.INOX
- Stainless steel hook closure - 15.5082.INOX
- Adjustable stainless steel toggle latch - 15.5083.INOX
- Zapięcie dociągające regulowane z blokadą otwarcia - 15.5085
- Quarter-turn locks
- Shape key for quarter-turn locks - 15.2060
- Self-locking quarter-turn lock with key - 15.0002
- Quarter-turn latch with butterfly handle, 18mm - 15.2080
- Quarter-turn shaped lock, 18mm - 15.2010
- Quarter-turn lock with key, 18mm - 15.2011
- Quarter-turn shape lock, compact, 13.5mm - 15.2012
- Quarter-turn key lock, compact - 15.2013
- Quarter-turn shaped lock, with padlock eye, 18mm - 15.2014
- Quarter-turn shaped cam lock with hook tongue, 18mm - 15.2015
- Quarter-turn shape lock, adjustable - 15.2016
- Quarter-turn lock with T-handle, 18mm - 15.2081
- Quarter-turn latch with L-type handle, 18mm - 15.2082
- Quarter-turn lock with folding handle, compact, 13.5mm - 15.2083
- Cassette locks and handles
- Snap-on cassette holder - 15.5040
- Snap cassette holder - 15.5041
- T-handle cam lock - 15.2110
- Snap-in cassette lock - 15.2115
- T-handle cassette lock - 15.2114
- Latch lock with a simple handle - 15.2113
- Square quarter-turn flush lock - 15.2112
- Quarter-turn recessed lock, round - 15.2111
- Flat latches for snap point connections - 15.2131
- Snap joint connection links - 15.2130
- Latch locks
- Edge guards and seals
- PVC edge protector - 15.4010
- PVC edge protection - 15.4011
- PVC/EPDM edge gasket, side seal - 15.4020
- EPDM edge gasket, top seal, certified according to UL - 15.4021
- EPDM edge gasket, side seal, certified according to UL - 15.4022
- EPDM edge seal, upper fin - 15.4023
- Self-adhesive EPDM gasket, type E - 15.4030
- EPDM gasket for covers and doors - 15.4041
- EPDM gasket for glass connection, type H - 15.4040
- Filler profile for gasket type H - 15.4042
- Compression locks
- Tilt handles
- Tilt handle with a space for a cylinder insert - 15.1010
- Tilt handle with key, with padlock eye - 15.1011
- Tilt handle with shaped insert - 15.1012
- Round Bolt Guide - 15.1022
- Round bolt guide - 15.1023
- Round bolt guide - 15.1024
- Flat Bolt Guide - 15.1025
- Internal gear mechanism - 15.1026
- Three-point language with delimiter - 15.1030
- Single-point language with delimiter - 15.1031
- Cylinder lock with key - 15.1040
- Accessories for locking systems
- Connector joining sections 40x80mm - 15.5090
- Connector joining sections 50x50mm - 15.5091
- Butterfly clamp with handle, single - 15.5050
- Double bridge clamp with butterfly handle - 15.5051
- VDI 6022 square inspection window - 15.5070
- Rectangular inspection window - 15.5071
- VDI 6022 round inspection window - 15.5072
- Round inspection window - 15.5073
- A4 Document Pocket - 15.5060
- Overlaying spring-loaded chest handle - 15.5042
- Fastenings
-
Protective elements
- Protective caps
- Protective cap for screws - 10.0024
- Protective cap for bolts and nuts - 10.0022
- Protective cap for hexagonal bolts and nuts - 10.0021
- Protective cap for hexagonal bolts and nuts - 35.0001
- Universal grease fitting cover, nipple - 16.6529
- Flat protective cap for hexagonal bolts and nuts - 10.0030
- Protective cap for bolts and nuts, type 1 - 22.0013
- Protective cap for bolts and nuts, type 2 - 22.0014
- Protective cap for bolts and nuts, type 3 - 22.0042
- Protective cap for bolts and nuts, type 4 - 22.0043
- Decorative and masking hubcaps
- Decorative cap for TORX screws - 10.0010
- Concealing cap for mounting holes - 10.0011
- Decorative cap for special screws - 10.0018
- Decorative cap for special screws - 10.0019
- Camouflage hubcap with rosette and cover - 10.0012, 10.0013, and 10.0014
- Concealing cap for special screws - 10.0020
- Pozidrive screw cover cap - 10.0005
- Concealing cap for Pozidrive screws - cross-shaped - 10.0006
- Camouflage cap combined with rosette - 10.0016, 10.0017
- Hubcap combined with rosette and cover - 10.0012, 10.0013, 10.0014
- Decorative cap for rivets - 10.0001
- Decorative cap for covering holes - 10.0003
- Camouflage hubcap with wide rim - 10.0002
- Hex Screw Cover Cap - 10.0004
- Concealing cap for TORX screws - 10.0009
- Sanitary fittings
- Flanged bushing without thread - 9.0007
- Cap for sanitary fixtures with double thread for use with nut 9.0005 - 9.0004
- Decorative hubcap for use with rosette 9.0009 - 9.0008
- Flange nut for use with cap 9.0004 - 9.0005
- Flange nut for use with cap 9.0004 - 9.0006
- Rosette for use with hubcap 9.0008 - 9.0009
- Rosette for use with decorative hubcap 9.0002 - 9.0003
- WC compact mounting kit - 11KOMPLETM6X80
- Protective rosette with securing tabs for conical screws - 4.0007
- Protective covers
- Cap for a square fence post - 19.0069
- Cap for a round fence post - 19.0062
- Overlay for square or rectangular profiles - 19.0075
- Pipe cover - 19.0061
- Pipe overlay (PE) - 19.0060
- Rectangular protective cap with rounded tip - 21.0004
- Round protective cover overlay - 21.0001
- Rectangular protective cover - 21.0002
- Rectangular protective cover (flat) - 21.0003
- Smooth handle for pipes - 21.0007
- Smooth handle for pipes - 21.0008
- Knurled handle for rectangular profiles - 21.0006
- Knurled pipe handle - 21.0005
- Protective cap for square profiles, PE - 19.0045
- Protective PVC pipe - 13RURA_PCV
- Profile end caps
- Slides and saddle pads
- Saddle support for round pipes (Slide) - 19.0042
- Sliding foot for round profiles - 19.0033
- Saddle foot for bent round tubes - 19.0039
- Screw-on glide foot - 19.0080
- Adjustable sliding foot with metal cap for round profiles - 19.0029
- Saddle base for bent round tubes (slide) - 19.0040
- Skewed glide foot for square or rectangular profiles - 19.0073
- Angled sliding foot for round profiles - 19.0035
- Saddle foot with a pin for round pipes (Slide) - 19.0043
- Double slide with pins - 19.0171
- Plug-in glide for square and rectangular profiles - 19.0072
- Cap slide for round profiles - 19.0041
- Glide foot with metal cap for round profiles - 19.0031
- Metal glider with felt and screw - 16.18SLIZG
- Slides - 19.0046
- Felt cap O-22mm - 19.0034
- Slide with cap for rectangular profiles - 19.0076
- End caps for profiles
- Cap for square profiles - 19.0074
- End cap for square profiles - 19.0048
- End cap for round profiles - 19.0050
- End cap for round profiles - 19.0051
- End cap for round profiles - 19.0052
- End cap for round profiles - 19.0055
- End cap for oval profiles - 19.0053
- End cap for oval profiles - 19.0054
- End cap for rectangular profiles - 19.0049
- End cap with metal cover for square profiles - 19.0068
- End cap with metal cover for round profiles - 19.0065
- End cap with metal cover for round profiles - 19.0066
- End cap with metal cover for rectangular profiles - 19.0067
- Glossy chrome cap for round profiles - 19.0092
- Inserts for profiles
- Threaded plug for square profiles - 19.0083
- Threaded plug for round profiles - 19.0085
- Threaded cap for rectangular profiles - 19.0084
- Threaded zinc alloy end cap for square profiles - 19.0086
- Threaded zinc alloy plug for round profiles - 19.0286
- Threaded zinc alloy plug for oval profiles - 19.0386
- Threaded zinc alloy plug for rectangular profiles - 19.0186
- End cap with integrated nut for square profiles - 19.0019
- End cap with built-in nut for round profiles - 19.0026
- End cap with built-in nut for rectangular profiles - 19.0097
- Plug with an embedded threaded bushing for round profiles - 19.0025
- Recessed wheel for square profile - 89.0048
- Recessed wheel for round profile - 89.0052
- Threaded sleeve end cap for square profiles - 38.0207
- Threaded sleeve cap made of stainless steel for square profiles - 38.0206.INOX
- Zaślepki zabezpieczające
- Connectors for profiles
- Simple connector for square profiles - 19.1048
- Connector for round profiles - 19.1052
- Angular connector for 2 square profiles - 19.2048
- 3D Connector for 3 Square Profiles - 19.4048
- 3D connector for 4 square profiles - 19.6048
- 2D connector for 3 square profiles - 19.3048
- 90° Expansion Connector for Round Profiles - 19.0077
- 180° expansion connector for round profiles - 19.0079
- Simple connector for rectangular profiles - 19.1049
- Articulated connector for 2 square profiles - 19.1948
- Articulated connector for 2 round profiles - 19.1952
- Protective caps
-
Standard elements
- Caps
- Butterfly nut - 2.0006
- Butterfly nut, through type, with serrated flange - 9.0010
- Wing nut with a through threaded hole - 2.0005
- Knurled nut - 2.0013
- Knurled nut - 2.0015
- Hex nut - 2.0001
- Hex nut for quick assembly - 2.0018
- Hexagonal cap nut -2.0010
- Hexagon flat nut - 2.0009
- Hexagon flange nut - 2.0002
- Knurled nut according to DIN 466 - 2.0012
- Knurled nut according to DIN 467 - 2.0014
- Knurled conical nut - 2.0011
- Washers, Rosettes, and Rolls
- Flat washer according to DIN 34815 (formerly DIN 125) - 3.0001
- Washer according to DIN 34816 (formerly DIN 9021) - 3.0002
- Narrow washer according to DIN 433 - 3.0003
- Washer with securing phase - 4.0001
- Protective phase washer - 4.0004
- Washer with locking tabs - 4.0002
- Countersunk screw rosette - 4.0006
- Protective rosette with projections for conical screws - 4.0005
- Grooved spacer roller - 5.0002
- Spacer roller - 5.0001
- Flanged bushing - 27.0001 - 27.0016
- Protective washer - 4.0003
- Flanged bushing, made of plastic - 25.0004 - 25.0050
- Serrated lock washer for cylindrical screws - 4.0009
- Spacer roller - 5.0003
- Grooved spacer roller - 5.0005
- Clips, Clamps, and Glands
- Cable gland made of plastic with metric thread - 12.0001
- Cable gland made of plastic with PG thread - 12.0007
- Cable gland made of plastic, with metric thread and non-standard clamping range - 12.0002
- Locknut for cable gland (counter nut) with metric thread - 12.0008
- Locknut for cable gland with pipe thread - 12.0009
- Cable grommet - 19.0087
- Clip - 32.0008
- Locknut for brass gland (counter nut) - 12.0023
- Double cable mounting bracket - 24.0031
- Single cable mounting bracket - 24.0030
- Cable mounting clip with re-openable feature - 24.0033
- Mounting clamp without notch - 32.0002
- Clamp without incision - 32.0003
- Mounting clamp with notch - 32.0001
- Mounting clamp with notch - 32.0004
- Metric threaded closing plug with slot - 12.0010
- Threaded pipe end cap with a slot - 12.0011
- Choke - Conical Cable Gland - 12KK
- Sealing plug with PG thread and membrane - 12.0013
- Closing plug with PG hole - 12.0014
- Bolts
- Hex socket screw - 1.0008
- Flat cylindrical head screw with a slot - 1.0001
- Pan head screw with slot - 1.0002
- Threaded plastic rod - 1.0013
- Socket head threaded pin - 1.0016
- Threaded pin with groove - 1.0012
- Mushroom head bolt with square neck - 1.0009
- Mushroom head screw with slot - 1.0020
- Wing bolt - 1.0014
- Knurled head screw with shoulder, without slot according to DIN 464/465 - 1.0010
- Knurled head screw with shoulder, with slot according to DIN 464/465 - 1.0011
- Pan head screw with cross recess - 1.0007
- Flat countersunk head screw with cross recess - 1.0006
- Flat countersunk head screw with slot - 1.0004
- Flat countersunk head screw with internal hexagon - 1.7991
- Lens head countersunk screw with cross recess - 1.0966
- Lens head countersunk screw with slot according to DIN EN ISO 2010 (previously DIN 964) - 1.0005
- Hexagon head screw with full thread, according to DIN 34810 (formerly DIN 933) - 1.0003
- Hexagon head bolt, with partial thread, according to DIN 34810 (previously DIN 931) - 1.0931
- Hexagon head bolt with groove, according to DIN 34810 (formerly DIN 933) - 1.0017
- Lens head screw with TORX socket, according to DIN 34812 (formerly DIN 7985) - 1.0021
- Spacer bushings
- Nickel-plated brass spacer bushing with threaded pin - 31.0002
- Nickel-plated brass spacer bushing with internal thread - 31.0001
- Plastic spacer bushing - 31.0007
- Plastic spacer bushing with threaded pins - 31.0009
- Plastic spacer bushing with threaded pin - 31.0006
- Plastic spacer bushing with threaded pin - 31.0008
- Stainless steel spacer bushing with threaded pin - 31.0035
- Stainless steel spacer bushing with internal thread - 31.0034
- Zinc-coated steel spacer sleeve with threaded pin - 31.0004
- Galvanized steel spacer bushing with internal thread - 31.0003
- Spacer bushing made of plastic with threaded holes - 31.0005
- Spacer sleeve - 31.0032
- Flanged bushing, made of plastic - 25.0004 - 25.0050
- Brass spacer bushing - 31.0033
- Spacer bushing made of plastic - 31.0014
- Cable ties
- Caps
-
Promotions
- Dźwignie nastawne, stałe i zaciskowe
- Adjustable metal lever with threaded hole - 38.0025 (kopia)
- Adjustable metal lever with threaded pin - 38.0026 (kopia)
- Adjustable lever made of chrome-plated zinc alloy, with a stainless steel threaded bushing and metal button - 38.0232.INOX (kopia)
- Adjustable lever EUROMODEL with threaded bushing and button - 6.0011 (kopia)
- Adjustable lever with threaded pin and button, slim design - 38.0302 (kopia)
- Adjustable lever made of zinc alloy with threaded hole, slim design - 38.0305.INOX (kopia)
- Adjustable lever made of zinc alloy with threaded bushing - 6.0005 (kopia)
- Adjustable lever made of zinc alloy with threaded stud - 6.0006 (kopia)
- Clamp lever with threaded bushing - 6.0013 (kopia)
- Fixed lever "EUROMODEL" with threaded bushing - 6.0015 (kopia)
- Clamp lever according to DIN 99 with a smooth hole - 6.2099 (kopia)
- Dociski szybkomocujące
- Koła ręczne i korby
- Two-spoke handwheel - 6.0178 (kopia)
- Two-spoke handwheel with a fixed rotating handle - 6.0179 (kopia)
- Two-spoke handwheel with a rotating, foldable handle - 6.0185 (kopia)
- Solid handwheel - 6.0166 (kopia)
- Solid handwheel with fixed revolving handle - 6.0168 (kopia)
- Solid handwheel with a rotating, foldable handle - 6.0173 (kopia)
- Solid handwheel, aluminum - 39.0002 (kopia)
- Solid handwheel - base element - 6.0264 (kopia)
- Folding handle crank with rotating handle and plain bushing - 6.0030 (kopia)
- Crank with a fixed rotating handle and a smooth bushing - 6.0029 (kopia)
- Pokrętła gwiazdowe
- Star knobs with blind threaded bush - 6.0048 (kopia)
- Star knob with threaded spindle - 6.0055 (kopia)
- Star knob with threaded stud - 6.0057 (kopia)
- Star knob with threaded bushing - 38.0012 (kopia)
- Star knob with threaded bushing - 6.0052 (kopia)
- Star knob with threaded bushing - 38.0014 (kopia)
- Star knob with built-in nut - 8.0001 (kopia)
- Star knob with built-in nut - 16.6020 (kopia)
- Star knob with smooth bushing - 6.0054 (kopia)
- Safe star knob with threaded spindle - 38.0065 (kopia)2
- Pokrętła krzyżowe
- Three-arm knob with threaded spindle - 6.0074 (kopia)
- Cross knob with threaded spindle - 6.0047 (kopia)
- Three-arm knob with threaded bushing - 6.0069 (kopia)
- Cross knob with threaded bushing - 6.0044 (kopia)
- Cross knob with through threaded bushing - 38.0045 (kopia)
- Cross knob with threaded stem - 07G (kopia)
- Cross knob with built-in nut - 8.0100 (kopia)
- Cross knob with smooth bushing - 6.0046 (kopia)
- Three-arm knob with smooth bushing - 6.0073 (kopia)
- Three-arm knob with smooth bushing - 6.0191 (kopia)
- Pokrętła motylkowe
- Pokrętła radełkowane
- Hexagonal knob with threaded stem - 7.0017 (kopia)
- Knob with special bushing - 6.0063 (kopia)
- Dial with scale for knurled knob 6.0309 and 6.0310 - 6.0311 (kopia)
- Knurled knob with threaded pin - 7.0041 (kopia)
- Knob with threaded bushing - 6.0067 (kopia)
- Knurled knob with threaded pin - 7.0006 (kopia)
- Cylindrical knob with smooth bushing - 6.0061 (kopia)
- Knurled knob with threaded bushing - 38.0076 (kopia)
- Knurled knob with through-threaded bushing - 38.0077 (kopia)
- Knurled knob with through threaded bushing - 6.0077 (kopia)
- Knurled flat knob with threaded through hole - 6.0148 (kopia)
- Knurled knob with threaded bushing - 6.0309 (kopia)
- Knurled knob with threaded bushing - 6.0162 (kopia)
- Knurled knob with smooth bushing - 6.0310 (kopia)
- Knurled knob with smooth bushing - 6.0164 (kopia)
- Stopki poziomujące
- Movable footer - 6.0142 (kopia)
- Non-slip adjustable foot - 38.1202 (kopia)
- Adjustable foot with mounting holes - 6.0145 (kopia)
- Rubber fixed foot - 19.0106 (kopia)
- Fixed metal foot - 19.0003 (kopia)
- Stała stopka - 19.0070 (kopia)
- Adjustable foot with mounting holes - 6.0328 (kopia)
- Adjustable stainless steel foot, anti-slip - 38.1305.INOX (kopia)
- Fixed adjustable foot with built-in stainless steel screw - 19.0202.INOX (kopia)
- Adjustable fixed foot with built-in screw - 19.0202 (kopia)
- Adjustable steel foot, non-slip, with a one-sided mounting bracket - 38.1301 (kopia)
- Here is the translation of the text: "Foot with retractable wheel and threaded stem - 16.1280" (kopia)
- Adjustable stainless steel foot, anti-slip, with single-sided mounting bracket - 38.1306.INOX (kopia)
- Adjustable stainless steel foot, non-slip, with double-sided mounting bracket - 38.1307.INOX (kopia)
- Adjustable steel anti-slip foot - 38.1300 (kopia)
- Swivel steel anti-slip foot - 38.1321 (kopia)
- Adjustable stainless steel foot, hygienic, non-slip, with a single-sided mounting bracket - 38.1311.INOX (kopia)2
- Swivel foot with mounting holes, non-slip, self-assembly - 38.1203.ESR (kopia)
- Adjustable foot for self-assembly - 38.1200.ESR (kopia)
- Trzpienie ustalające
- Lock nut for pins and setting knobs - 29.0022.INOX, made of stainless steel. (kopia)
- Locating pin without lock, made of stainless steel - 29.0033.INOX (kopia)
- Locating pin without lock, made of stainless steel, with short thread - 29.0037.INOX (kopia)
- Locating pin with lever, made of stainless steel - 38.0028.INOX (kopia)
- Locating pin with mounting plate, without lock - 38.0032 (kopia)
- Locating pin - 6.0235 (kopia)
- Locating pin made of oxidized steel with locknut - 6.0232 (kopia)
- Uchwyty i rękojeści cylindryczne
- Rotary Handle EUROMODEL with Threaded Hole - 6.0306 (kopia)
- Rotary handle with threaded pin and hex socket - 38.0127 (kopia)
- Rotary handle with threaded pin and internal hexagon - 38.0018 (kopia)
- Rotating handle made of chrome-plated steel - 39.0009.INOX (kopia)
- Rotating handle made of sandblasted steel - 39.0008 (kopia)
- Rotating handle, foldable, made of duroplast, with threaded pin - 39.0007 (kopia)
- Handle with a smooth through hole - 6.0122 (kopia)
- Rotating handle, foldable made of duroplast, with threaded bushing - 39.0006 (kopia)
- Cylindrical handle with mounting hole - 38.0097 (kopia)
- Rotating handle, bearing-mounted, with threaded pin and hex socket - 38.0129 (kopia)
- Uchwyty grzybkowe i teowe
- Gałki kuliste
- Uchwyty przemysłowe
- Aluminum bow handle with threaded bushings - 38.0020 (kopia)
- Aluminum loop handle with through holes - 38.0019 (kopia)
- Full handle with threaded bushings - 38.0024 (kopia)
- Bow handle with through holes and caps - 38.0021 (kopia)
- Bracket handle with threaded bushings and end caps - 38.0022 (kopia)
- Bow handle with threaded bushings - 6.0019 (kopia)
- Handle with threaded bushings and cover caps - 38.0080 (kopia)
- Full bow handle with threaded bushings - 6.0021 (kopia)
- Full bow handle with threaded bushings made of stainless steel - 6.0021.INOX (kopia)
- Handle with a diameter of 20 mm - 6.0022 (kopia)
- Drawer and equipment handle - 38.0703 (kopia)
- Pipe handle - 38.0700 (kopia)
- Bail handle - 38.0702 (kopia)
- Aluminum handle with through holes - 38.0707 (kopia)
- Heavy-duty bracket handle, made of aluminum, with threaded bushings - 38.0708 (kopia)
- Massive loop handle - 38.0715.INOX (kopia)
- Heavy bracket handle with through holes - 38.0716 (kopia)
- Wibroizolatory
- Vibration isolator with threaded studs, 60 Shore A, type A - 45.0001 (kopia)
- Vibration isolator with stud and threaded hole, 60 Shore A, type B - 45.0004 (kopia)
- Threaded hole vibration isolator, 60 Shore A, type C - 45.0009 (kopia)
- Tapered vibration isolator with threaded studs, 60 Shore A - 45.0011 (kopia)
- Parabolic Vibration Isolator (Buffer), 60 Shore A - 45.0012 (kopia)
- Wskaźniki położenia
- Zatrzaski kulkowe
- Threaded plunger with ball and high spring force - 40.0002.INOX (kopia)
- Threaded ball plunger, made of stainless steel, with a screwdriver slot - 38.0031.INOX (kopia)
- Threaded ball plunger - 6.0238 (kopia)
- Threaded plunger with ball and hex socket - 6.0247.INOX (kopia)
- Threaded plunger with ball and hexagonal socket, with reinforced clamping force - 6.0248.INOX (kopia)
- Threaded ball catch - 40.0001.INOX (kopia)
- Zawiasy
- Hinge with through holes, non-detachable - 38.0502 (kopia)
- Hinge with through holes, detachable, left opening - 38.0500 (kopia)
- Hinge with through holes, detachable, right opening - 38.0501 (kopia)
- Hinge with threaded pins - 6.0159 (kopia)
- Hinge with threaded bushings - 6.0152 (kopia)
- Hinge with threaded bushings - 6.0157 (kopia)
- Hinge with opening force adjustment - 6.0460 (kopia)
- Lowered pin hinge - 6.0402 (kopia)
- Maskownice śrub i nakrętek
- Stopki ślizgowe
- Zaślepki ozdobne i maskujące
- Concealing cap for mounting holes - 10.0011 (kopia)
- Decorative cap for special screws - 10.0019 (kopia)
- Pozidrive screw cover cap - 10.0005 (kopia)
- Concealing cap for Pozidrive screws - cross-shaped - 10.0006 (kopia)
- Concealing cap for special screws - 10.0020 (kopia)
- Decorative cap for rivets - 10.0001 (kopia)
- Camouflage cap combined with rosette - 10.0016, 10.0017 (kopia)
- Decorative cap for covering holes - 10.0003 (kopia)
- Hubcap combined with rosette and cover - 10.0012, 10.0013, 10.0014 (kopia)
- Nasadki ochronne
- Zaślepki do profili
- End cap for round profiles - 19.0051
- End cap for square profiles - 19.0048 (kopia)
- End cap for round profiles - 19.0050 (kopia)
- Plug-in glide for square and rectangular profiles - 19.0072 (kopia)
- End cap for round profiles - 19.0052 (kopia)
- End cap for oval profiles - 19.0053 (kopia)
- End cap for rectangular profiles - 19.0049 (kopia)
- Slide with cap for rectangular profiles - 19.0076 (kopia)
- End cap with metal cover for square profiles - 19.0068 (kopia)
- End cap with metal cover for round profiles - 19.0066 (kopia)
- Wkładki z gwintem
- Zaślepki zabezpieczające
- Protective cover - 22.0006 (kopia)
- Conical shield - 22.0008 (kopia)
- Protective cap for internal threads - 22.0001 (kopia)
- Threaded plug with internal hex and protective flange - 22.0010 (kopia)
- Universal protective cap for internal threads - 22.0003 (kopia)
- Universal protective cap for external threads - 22.0012 (kopia)
- Nakrętki
- Śruby z tworzywa
- Flat cylindrical head screw with a slot - 1.0001 (kopia)
- Pan head screw with slot - 1.0002 (kopia)
- Threaded plastic rod - 1.0013 (kopia)
- Threaded pin with groove - 1.0012 (kopia)
- Socket head threaded pin - 1.0016 (kopia)
- Knurled head screw with shoulder, with slot according to DIN 464/465 - 1.0011 (kopia)
- Flat countersunk head screw with slot - 1.0004 (kopia)
- Hexagon head screw with full thread, according to DIN 34810 (formerly DIN 933) - 1.0003 (kopia)
- Hexagon head bolt, with partial thread, according to DIN 34810 (previously DIN 931) - 1.0931 (kopia)
- Podkładki z tworzywa
- Akcesoria montażowe
- Cable gland made of plastic with metric thread - 12.0001 (kopia)
- Cable gland made of plastic with PG thread - 12.0007 (kopia)
- Locknut for cable gland (counter nut) with metric thread - 12.0008 (kopia)
- Locknut for cable gland with pipe thread - 12.0009 (kopia)
- Clip - 32.0008 (kopia)
- Double cable mounting bracket - 24.0031 (kopia)
- Single cable mounting bracket - 24.0030 (kopia)
- Cable mounting clip with re-openable feature - 24.0033 (kopia)
- Metric threaded closing plug with slot - 12.0010 (kopia)
- Mounting clamp without notch - 32.0002 (kopia)
- Clamp without incision - 32.0003 (kopia)
- Mounting clamp with notch - 32.0001 (kopia)
- Threaded pipe end cap with a slot - 12.0011 (kopia)
- Choke - Conical Cable Gland - 12KK (kopia)
- Sealing plug with PG thread and membrane - 12.0013 (kopia)
- Closing plug with PG hole - 12.0014 (kopia)
- Śruba dociskowa - 12DS
- Uszczelka gumowa - 12ED
- Tulejki dystansowe
- Zamki
- PVC edge protector - 15.4010 (kopia)
- Tilt handle with a space for a cylinder insert - 15.1010 (kopia)
- Adjustable tension latch - 15.5081 (kopia)
- EPDM edge gasket, top seal, certified according to UL - 15.4021 (kopia)
- Adjustable stainless steel toggle latch - 15.5080.INOX (kopia)
- EPDM edge gasket, side seal, certified according to UL - 15.4022 (kopia)
- Quarter-turn key lock, compact - 15.2013 (kopia)
- Quarter-turn recessed lock, round - 15.2111 (kopia)
- Dźwignie nastawne, stałe i zaciskowe
You are here:
- Main page
- 10 (11)
Folding rotating handle with threaded pin D-20mm H-50mm M6 x 12mmRotating handle with screw and nut H-50mm M6 x 13mm